Versatrax 100™
Document: UMDT013103.docm
Revision: A10
Created by: KJB
Date: 26 Sep 2019
3070984-A10
Source Location: C:\ePDM\ISLEng\products\dt-versatrax100mkii\manuals\UMDT013103.docm
Page 27 of 41
Us
er
M
an
u
al
FIGURE 19: PARALLEL EXTENDED PIPE FIT
Camera & Light Installation
The front SP90
™ camera is mounted to the vehicle using M6x16mm socket cap screws. The camera is
oriented with the Schrader valve facing up. Additional lighting is provided by the two 801 Lights, installed
using M3x8mm socket cap screws. Spacers move the lights forward to beside the camera. The rear
facing camera uses an extended mount (from the factory) to prevent cabling interference with the
Spectrum 90 camera. Use Loctite 243 (blue) with all fasteners.
FIGURE 20: PARALLEL EXTENDED CAMERA MOUNT