Nanomag™
Document: UMAM000196.docm
Revision: A06
Created by: JS
Date: 26 Sep 2019
IPN: 3024835-A06
Source Location: C:\ePDM\ISLEng\products\am-nanomag\manuals\UMAM000196.docm
Page 4 of 19
User Ma
nual
About This Manual
This manual has been prepared to assist you in the operation and maintenance of your Eddyfi
Technologies Inuktun equipment. Correct and prudent operation rests with the operator who must
thoroughly understand the operation, maintenance, service and job requirements. The specifications and
information in this manual are current at the time of printing.
This product is continually being updated and improved. Therefore, this manual endeavors to explain and
define the functionality of the product. Furthermore, schematics or pictorials and detailed functionality
may differ slightly from what is described in this manual.
Eddyfi Technologies reserves the right to change and/or amend these specifications at any time without
notice. Customers will be notified of any changes to their equipment.
Information in this manual does not necessarily replace specific regulations, codes, standards, or
requirements of others such as government regulations.
This manual copyright © 2019 by Inuktun Services Ltd. All rights reserved.
Description
The Inuktun NanoMag
™ crawler is a custom video inspection vehicle for confined spaces. The vehicle
features a worm-drive NanoTrac crawler platform with front and rear color cameras. Both cameras have
their connections made in the center cross section of the frame and are mounted low between the tracks
giving the vehicle an overall height of two (2) inches. The tether has a length of 100 feet (30 meters) and
is terminated inside the left rear frame portion where it also is restrained. The vehicle is equipped with 10-
barrel style magnets that can be found at the bottom of the vehicle behind two retainer plates. This allows
the vehicle to crawl up and down a steel wall in any direction and operate completely inverted on a
reasonably smooth surface.
The NanoMag crawler features a full function pan and tilt front camera with manual focus that can focus
in on an object less than one (1) inch away. It is operated from the controller as well as the pan and tilt
functions as well as the six (6) LEDs. The lights are fully adjustable in intensity from off to bright. The rear
camera is fixed, as is the focus setting. Focus has been preset from six (6) inches to infinity.
Specifications
Front Camera
Spectrum 45™ pan and tilt camera
Pick-up Element
1/4” CMOS (NTSC or PAL)
Lens
3.6mm
Resolution
420 TV Lines (Horizontal)
Illumination
0.2 lux