Eddyfi Technologies Ectane 3, User Manual, Page: 22 / 66

22
5. Carrying Handle
The handle on the Ectane 3 can be used to lift and carry the instrument.
Figure 5-1 – Carrying handle
6. Chassis Ground Connector
The ground connector, which is used to ground the Ectane 3 ’s chassis when the situation
requires it, is found at the rear of the instrument.
This instrument must be connected according to the manufacturer’s
instructions to prevent risks of electric shocks. A bad grounding may
produce a short circuit that can damage the electronic components
or cause electric shocks.