edc HAZ-DUST HD-7204, User Manual, Page: 67 / 93

67
Introductions
Internally stored data can be downloaded to DustComm Pro for detailed analysis.
Downloading Data
The three major steps used to download data from the EDC dust-monitoring unit to a PC are listed
below and detailed in the next few pages.
1.
Connect the cable.
2. Prepare the PC for data
transmission.
3. Prepare the EDC dust-monitoring unit for data transmission.
Connect the Cable
Follow the steps in the table below to connect the cable for data transmission.
1. Connect one end of the supplied micro USB cable to the EDC dust-monitoring unit.
2. Connect the other end of the micro USB cable to the appropriate COMM port on the PC.
Note: Check that both connections are secure. An intermittent connection can disrupt data
transmission.
Preparing the PC
Follow the steps in the table below to prepare the PC for data transmission.
Note: Multiple locations (data sets) will be separated by tabs at the bottom of the program.
1. Open DustComm.
2. Select Unit and Select Properties.
3. Under the Properties selection choose your unit and the Com Port that you want to connect.
Press Ok when you are finished
4. Select Unit and Select Download.
5. When the items above are finished you should see the download box appear.
Preparing the Unit
Follow the steps in the table below to prepare the EDC unit for data transmission.
1. Select Review Data from the Main Menu on the unit.
If... Then Select...
•
Saving the data in the project
folder for the first time, or,
•
Saving an existing folder to a
new name or location.
1. Save As, then,
2. Type a file name for
the project file.
3. Select OK.
Saving an updated version of an
existing project folder to the same
file name and location. Save
Downloading Data