F15 Series Fetal & Maternal Monitor Service Manual
Disassembling the Monitor
- 51 -
Replace the DC-DC transfer board in a reverse procedure. Refer to the following illustration when
connecting wires. Ensure they are all correctly connected.
1
：
Power Output Cable Socket
2
：
Battery Charging Cable Socket
3
：
Switch Connection Cable Socket
4
：
NFC Connection wire socket
5
：
Fan connection socket
9.4.2 Replacing the Fan
To remove the fan,
1)
Separate the DC-DC transfer board per section 9.4.1.
2)
Remove the four screws on the fan.
3)
Disconnect all the wires.
To replace the fan,
Replace the fan in a reverse procedure. Refer to the following illustration when connecting wires.
Ensure they are all correctly connected.
1 2
3
4
5
