EDAN Acclarix AX4 User Manual Download Page 30

Page: 30 / 151

Acclarix AX4 Diagnostic Ultrasound System User Manual

Getting Started

- 23 -

3.7 Control Panel

Figure 3-12 Control Panel of the System

No.

Key

Name

Description

Patient

Invokes the Patient Information Screen typically used to
start/end exams or to modify patient information during an
exam. See section 4.1.

Preset

Allows you to change the Preset being used. See section
8 for details.

End Exam

Completes an exam without invoking the Patient
Information Screen for the next exam. See section 4.2.

Utilities

Press this button to display the Set Up, Maintenance,
Connectivity, Screen Adjust keys, etc. on the touch
screen.

Alt Store

One of three keys that can be configured to store images
or clips, or to set video printers. See section 7.4 for
details.

Report

Press to display the report page.

Review

Press to enter exam database or image review mode. See
section 7.4 for details.

Summary of Contents for Acclarix AX4
























































































































































Search results

Summary of Contents for Acclarix AX4

Reviews:

Brands by name

Popular brands

EDAN Acclarix AX4, User Manual

Search results

Summary of Contents for Acclarix AX4

Reviews:

Brands by name

Popular brands