ET180 QSC (9100011000)
Page 1
ECPIN
Quick Start Guide
Intelligent Wireless Food Thermometer ET180
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
1.
Introduction
ECPIN is a wireless food thermometer that gives home chefs real-time status inside the meat to avoid
undercook or overcook disasters and ensuring the perfect result every time. It connects to the ECPIN APP
via Bluetooth. Details and the real-time status of the meat can be read from your phone, giving you the
best result at your finger tips.
2.
Important Notes
–
Please read this carefully before use
•
This product is exclusive for cooking meat/food in grill or oven. It should only be used as described
in the User Manual (please go to visit our website www.ectherm.com).
•
DO NOT TOUCH ECPIN WITH BARE HANDS JUST AFTER COOKING
. Always wear oven gloves to
remove ECPIN from the meat after cooking.
•
It is required to insert ECPIN properly into the meat/food during cooking. Do not expose the metal
part of ECPIN to the heat generated by oven directly.
•
Do not use ECPIN in a microwave oven.
•
ECPIN can be cleaned and washed but do not
immerse it long in water.
•
This product is not intended for use by persons
with ages 12 and under.
•
Make sure the mobile phone is within the range
of monitoring distance during cooking. The
distance of operation is dependent on the
actual cooking environment. It will be shorter if
ECPIN is covered by a metal case.
•
There is a built-in Overheat alert in the ECPIN
APP to prevent the overheating of ECPIN. When
the measured temperature is higher than 80°C
or 176°F, the Overheat Alert will be triggered.
Take out ECPIN from the heat source with oven
gloves as soon as possible
•
The supplier will not be liable for any damage of
ECPIN due to misuse of the device.
3.
Getting Start
3.1
Charge the ECPIN
•
Put ECPIN into the charger and close the cover.
•
Connect the charger to a USB power source,
such as
power bank, USB adapter or USB socket
of PC/notebook etc. with the USB cable.
•
LED of the charger will turn on and is flashing
during charging. It will turn off when ECPIN is
fully charged.
3.2
Download the software ECPIN APP
Go to the website by scanning the QR code in
the right-hand side and download the ECPIN
APP.
