ECTACO SpeechGuard™ GI-4
User Manual
15
ADDITIONAL FEATURES
Adjust the Volume
Volume adjustment is a convenient feature of your ECTACO
SpeechGuard™ GI-4 allowing you to control the speech volume of
the voice translations.
1.
When in a topic or in the
Main Menu
, tap on the word
MENU
in
the upper part of the screen. The following menu will appear.
2.
Tap
Volume
. You will see the following chart.
3.
Tap on the chart or press the
Left
/
Right
buttons to change the
volume. Solid chart indicates full volume. Empty chart indicates
that the volume is at the minimum.
4.
To close the
Volume
chart, press the
Recognize
button or tap
anywhere on the screen.
Adjust Microphone Sensitivity
In some cases it may become necessary to increase or decrease
the sensitivity of the device to match the natural volume of your
voice. This is done through microphone sensitivity adjustment.
1.
Go to the
Setup
section by pressing the
Setup
button, or just tap
on the word
MENU
in the upper part of the screen and then select
Settings
in the appeared menu.