ECTACO SpeechGuard™ GI-4
User Manual
10
2.
Tap
or press the
Left
/
Right
buttons to open the
General
Settings
screen.
3.
On the
General Settings
screen, under
You speak to
, tap
Male
or
Female
. A check mark will indicate your selection.
4.
To apply your settings and exit the
Setup
section, tap
OK
in the
upper left of the screen or press the
Recognize
button. Now all the
gender-dependent translations will be shown and pronounced in
the selected grammatical gender.
Pronounce a Phrase Repeatedly
If you want your ECTACO SpeechGuard™ GI-4 to pronounce a
phrase repeatedly, use the
Announcement
function. The selected
phrase will be pronounced continuously until you stop it. To set the
Announcement
, please follow the steps below.
1.
Within a topic, highlight the desired phrase by tapping it with the
stylus.
2.
Tap on the word
MENU
in the upper part of the screen. The
following menu will appear.
3.
Tap
Announcement
. You will see the
Current announcement
screen.
4.
Tap
Set
.
You will see the
Announcement successfully set!
popup. Tap on the check mark
to close it.