Partner
®
EGP430T User's
Manual
20
9
Make sure to select an appropriate COM port.
9
Make sure you have no other
PC-Link
program running simultaneously with
EGP430T PC-Link
.
y
Select the
Send data
transfer mode.
Press ENTER.
y
Choose the section(s) you wish to send. Use SPACE to check or uncheck a
section.
y
Press ENTER to start the transfer.
9
Start the data transfer first on the receiving device, then on the sending
device.
y
To receive data, select the
Receive data
transfer mode. Press ENTER, and
the transfer will begin.
9
The time span between the data transfer startup on the PC and the device
must not exceed 30 sec.
9
Note that in the
Receive data
mode, the newly transferred data will replace
the old information saved in the corresponding sections of your device. In
case if empty sections are transferred, all data in the corresponding sections
of the
EGP430T
will be erased.
9
Always back up your important data!
Neither the manufacturer nor the
dealers assume any responsibility for lost or corrupted data.
9
It is recommended to use an external power supply while using the PC-Link
function.
SETUP
Personalize your EGP430T and ensure good maintenance of your personal
records by selecting options in the
Setup
section.
y
Press SHIFT+SETUP to enter the
Setup
section.
Most of the
Setup
section options are very easy to adjust. Unless stated
otherwise, enter a subsection and select the desired option with
Ð
,
Ï
. Then
press ENTER to confirm your choice.
Interface language
The default interface language of the EGP430T is English. You can switch
interface language between English, German, and Polish.
