Partner
®
EER430T User’s
Manual
20
Specify a password up to 8 characters in length. Press ENTER.
Retype the password for confirmation. Press ENTER.
Always remember your password. If you forget it, you will have to reset the
system, which will cause irrevocable loss of user data.
Changing the pas sword
Enter the
Set password
subsection. Input the current password. Press
ENTER.
Specify a new password. Press ENTER.
Retype the password for confirmation. Press ENTER to save the password.
Clearing the pass word
Enter the
Set password
subsection. Input current password. Press ENTER.
Don’t input any characters into next two fields, just press ENTER twice.
Security mode
With the help of the
Security mode
subsection you can protect your personal
records and lock up the
PC communication
function.
Enter the
Security mode
subsection. Press ENTER.
When the ON option is selected, data access is locked and the
indicator is
shown on the indicator line.
It is recommended to close a password-protected section before you turn the
device off.
The
Security mode
may be canceled by entering a valid password at the prompt
when:
▫
the OFF option in the
Security mode
subsection is selected
▫
any protected section is opened
Set contrast
The default contrast setting can be changed in the
Set contrast
subsection.
Change the contrast level by using
, .
Speech options
Suit your own pronunciation by adjusting the speed and frequency of the built-in
speech synthesizer.
