16
6.1 Pair with Gateway
If the gateway has been in operation, and you
have never had any WN31 (with STH35 probe)
multi-channel temperature and humidity
sensor(s) setup before, just power up the
sensor(s) and gateway will pick multi-channel
temperature and humidity data automatically.
If a WN31 (with STH35 probe) sensor has
been hooked on gateway before, and you have
a new WN31 (with STH35 probe) sensor to
replace the old one, unplug gateway from USB
socket and power up again, then the new
sensor will be learned and old sensor will be
erased.
6.2 Wi-Fi Connection for the Gateway
For this part, please refer to the manual of the
GW1100/GW1000 Wi-Fi gateway.
Any question, please contact the customer
service.
