10
There is a 5m power cord in the box, connecting via
the 2 PIN port to the camera, and power it via USB
plug (5V,1A) or computer USB port (power supply
only).
8. WiFi Router Configuration
When device is used for the first time, or change of a
new WiFi router with new ssid and password used,
then the wifi configuration process need to be
activated.
There are two ways to complete this task.
1) Via the ecowitt app. With “ecowitt” app, tap the
menu button, choose “Camera” to start the camera
adding process. The APP will walk you through the
whole process. Prior to go any further, please make
sure your phone setup for this “ecowitt” app with
precise location and WLAN access. Make sure to
turn off your mobile cellular data service and this will
avoid many unknown problems.
Summary of Contents for WittCam HP10
