ECOWITT WH2910, Operation Manual

Page: 23 / 67

23
6.3 Setting mode
Press and hold the SET button for two seconds to enter the SET Mode. To
proceed to the next setting, press (do not hold) the
SET
button.
To exit the SET mode at any time, press the LIGHT / SNOOZE button.
Table 5 summarizes the set mode sequence and commands.
Comm
and
Mode Settings Image
[SET]
+ 2
seconds
Enter Set Mode,
Beep On or Off Press [WIND +] to switch OFF
and ON.
This will prevent the beep from
sounding when pressing any
button.
[SET] Clear Max/Min Press [WIND +] to switch OFF
and ON.
When set to ON, the minimum
and maximum values reset every
day at midnight (00:00).
When set to OFF, the minimum
and maximum values must be
reset
manually.
[SET] 12 hour / 24 Hour
Format Press [WIND +] to switch hour
format between 12 hour and 24
hour format.
[SET] Hour Press [WIND +] or [PRESSURE
-] to
adjust hour up or down.
[SET] Minute Press [WIND +] or [PRESSURE
-] to
adjust minute up or down.