33
buttons will sometimes be referred to as just “
next
”, “
previous
”, “
+
” or “
-
”
if that is their function.
Press MENU again to return to the previous menu or normal mode.
5.2.1 Backlight
In backlight setting mode you use the GRAPH/next button to move between
the items you can change:
Enable or disable time-based backlight control. When disabled the
backlight stays on permanently, otherwise the backlight will be switched
on and off at designated times. Backlight off means the display is off!
Turn on backlight: Use
next
button to move between controlling hours
or minutes and use “
+
” and “
-
” buttons to changes the values.
Turn off backlight: Use
next
button to move between controlling hours
or minutes and use “
+
” and “
-
” buttons to changes the values.
Current brightness: Use “
+
” and “
-
” buttons to change brightness level,
indicated by the size of the yellow bar.
Use a single press of
MENU
to go back to the Setup menu, or a long press
to go back to normal mode.
5.2.2 Data Units
In the data unit sub-menu, you can change settings for the following:
Temperature: Select between F and C by repeatedly pressing the “
+
”
button
Barometer units: Select between hPa, inHg, and mmHg by repeatedly
pressing the “
+
” button
Wind speed: Select between mph, knots, m/s, km/h and bft by
repeatedly pressing the “
+
” button
Solar radiation: Select between w/m2, klux and fc by repeatedly
pressing the “
+
” button
Rainfall: Select between in and mm by repeatedly pressing the “
+
”
button
