Page - 43
4.2 Weights
NOTE:
Specifications subject to change.
Model Type
Model Number
Install Weight
Eco Therm
ET055
175 Pounds
Eco Therm
ET075
200 Pounds
Eco Therm
ET095
240 Pounds
Eco Therm
ET110
245 Pounds
Eco Therm
ET135
262 Pounds
Eco Therm
ET120R
268 Pounds
Eco Therm
ET165R
328 Pounds
Table 7 - Equipment Weight
4.3 Heating Recommendations
The following recommendations will reduce the amount of time required to heat a pool.
If unsure of
equipment heating capability, review equipment data plate.
See "Identifying Model Specifications" on
1. Confirm heat pump mode has been set to heating mode.
2. Set thermostat to desired water temperature.
3. Temporarily set the filter pump for continuous operation.
l
This will allow the Heat Pump the time required to heat the water at start-up.
l
After the water has reached the desired temperature, reset the filter pump to normal operating time-frames.
4. Use a pool cover or blanket to reduce heating time.
4.4 Cooling Recommendations
The following recommendations will reduce the amount of time required to cool a pool or cold plunge
application.
If unsure of equipment cooling capability, review equipment data plate.
Model Specifications" on page 42.
1. Confirm heat pump mode has been set to cooling mode.
2. Set thermostat to desired water temperature.
3. Temporarily set the filter pump for continuous operation.
l
This will allow the Heat Pump the time required to cool the water at start-up.
l
After the water has reached the desired temperature, reset the filter pump to normal operating time-frames.
