Ecostrad_Ecowärme_V1.2_09022022
14
5-4-5 | Timer mode
In this mode, the radiator will heat to a set temperature for a certain amount of time.
When the timer ends, the radiator will return to Auto mode.
To enter Timer mode:
1. Press MODE to move to Auto mode
2. Then, press the button labelled . A temperature will appear on
the screen, alongside the timer icon .
3. Set the desired temperature with and . The available
temperature range is 5 to 30 °C.
4. Press
to confirm and move to setting the time.
5. Set the desired heating time with and . You can set the timer anywhere
between 30 minutes and 72 hours.
6. Press
to confirm. The timer will begin immediately.
5-4-6 | Absence mode
In Absence mode, the radiator will stay in Frost mode, protecting your
home from cold snaps, for the duration of time that you are away.
When Absence mode ends, the radiator will return to Auto mode,
meaning your home will be perfectly warm for when you return.
To enter Absence mode:
1. Press MODE until the radiator is in Auto mode.
2. Then, press the button indicated by the Absence mode icon .
3. A number and the Absence icon will appear on the screen. Use and to
adjust the number of days that Absence mode should run. You can set this
anywhere between 1 and 365 days.
4. Confirm by pressing
. Absence mode will begin immediately.
5. To cancel this mode, press
again, and the display will return to Auto mode.
5-4-7 | Keypad lock
Press and hold the two upper central buttons for 5 seconds to lock the
display. The display will show
and all keys will be locked. To
unlock, repeat this process, and
will disappear.
5-5 | Advanced settings
The Ecowärme advanced settings menu allows you to configure your
device to even better suit your needs. To enter the advanced settings menu, first put
the radiator in standby mode by pressing the Standby Button. The screen should show
