11.3.2019
GSM BC englische Version 1.0 working copy - Google Docs
https://docs.google.com/document/d/1VKt6uoJvSfEkYLDzHNqqOVF-sEzni9rJ_CeRmnapthk/edit
28/53
OPERATION MANUAL GSM-BATCORDER
27
Test SMS
After entering and saving the telephone number you can send a test SMS to the
entered telephone number for checking the correct number and the transmission of
the SMS. You can do this by pressing the “Fn”-button together with the “right arrow”
button (
▸
). If the transmission of the test SMS has been successful, there is a
message on the GSM-batcorder display. Afterwards the main menu ( MAIN ) is
displayed automatically. In the next few minutes the SMS should have reached your
SMS-compatible-end device (like a mobile phone). If not, recheck the correct entry
of your telephone number into the GSM-batcorder.
‘ G’ is displayed in the status line, if batcorder is connected to the
GSM-network provider und ready to receive SMS. If only ‘+’ is
displayed in the status line your batcorder is connected to the
GSM-network provider but you still have to send a test-SMS to
complete the network registration .
It is mandatory to successfully send a test SMS for using the
SMS-Status functionality! Without this step the GSM batcorder
will not be able to send or receive SMS messages.
Activate TIMER
When all settings are done, a SD memory card is inserted and the test SMS has
been successfully sent, you can activate the TIMER :
For activating the TIMER simply press the red ON/OFF button in any of the
SETTINGS menus. You will then be asked if you want to activate the TIMER. By
pressing the ‘right arrow button’ (
▸
) you confirm this query.
You will then be asked if you want to set the TSL reference value (see below).
Summary of Contents for GSM-BATCORDER 1.0
Page 54: ......
