EcoLightLED.com
866-348-3492
775-636-6060
SPECIFICATIONS
DMX to Digital Decoder / Driver
These specification are subject to change without notice. This specification information is from the manufacturer of this product. Eco Light LED is not the manufacturer of this product.
Copyright
©
2010 Eco Light LED
1
FORWARD
SAFETY WARNINGS
PRODUCT BRIEF
Thank you for choosing our DMX to Digital Decoder / Driver. Before installation and use, we strongly recom-
mend you to read through this manual carefully to avoid unnecessary damage to yourself or the product..
To ensure safety, please follow the instructions below.
1. Please don’t install this decoder in lightning, intense magnetic or high-voltage fields.
2. To reduce the risk of component damage and fire caused by short circuit, make sure connection is properly
configured before powering on.
3. Always be sure to mount this unit in an area that will allow proper ventilation to ensure temperature is
within acceptable operating range.
4. Check if the voltage and power adapter suit the decoder & if anode or cathode definition is the same as the
controller’s.
5. Don’t connect cables with power on, make sure all wires are properly connected before powering on.
This DMX to Digital Decoder / Driver is meant to run LED lights with digital IC chips
，
with the help of the
DMX decoder’s data conversion. It is compatible with LED products using LPD6803 control chips.
