417101634_Lubo-DryExx_Advanced
- 46 -
Rev. 07-01.15
7.3.5.1 Message displays
fig. 7.16
The following messages are indicated:
Fault messages (must be acknowledged)
Operating signals
HMI-System messages
Result of diagnostics
Scroll in the messages
Use the scroll-bars
Leave screen
Press "Back"
7.3.6 Logout
fig. 7.17
•
To reset of actual password
Press "Logout"
7.3.7 General Parameters
fig. 7.18
•
To go to the “General Parameters”
Press "Para. Generaly"
7.3.7.1 Displays of Parameter Generaly
fig. 7.19
The display contains the following announcements:
•
Time relief pump
•
Time pre tension system
•
Time delay of empty signal
•
Pulse width of optional oval gear meter (OGM)
•
To change variables
press variable
•
To go to “operation mode”
Press "operation mode"
•
To go to “unit counter”
Press "unit counter"
•
To leave “Parameter Generaly“
Press ‘Back’
OR
•
To go to the ‘Start’ screen:
Press "
"
After leaving the picture with button „Back“ you see again the “Main Screen”.
