ENVIRONMENT!
Leaked, spilled dosing media can harm the environment.
Leaked, spilled dosing media must be cleaned and disposed of correctly,
according to the instructions on the product data sheet. It is essential to
ensure that the required personal protective equipment is used.
Preventive action:
Place product containers in a tank to collect leaking fluids without harming
the environment.
Hazards caused by pressurised components
DANGER!
Danger of injury from pressurised components!
With improper handling, pressurised components can move uncontrollably
and cause severe injuries. Liquid under high pressure can escape from
pressurised components if handled improperly or in the case of a defect.
This can lead to severe or fatal injuries.
– Establish a pressure-free state.
– Discharge any residual energy.
– Make sure that liquids cannot discharge accidentally.
– Immediately call in qualified staff to replace defective components which
are pressurised during operation.
2.9
Installation, maintenance and repair work
NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools.
Only use the correct tools.
DANGER!
Damage and injuries may occur if installation, maintenance or repair
work is carried out incorrectly.
All installation, maintenance and repair work must only be performed
by authorised and trained specialist personnel in accordance with the
applicable local regulations. Safety regulations and prescribed protective
clothing when handling chemicals should be followed. Attention must be
paid to the information included on the product data sheet for the metering
medium used. Prior to all work the feeding of the dosing medium should be
disconnected and the system cleaned.
NOTICE!
Only original equipment spare parts may be used for maintenance
and repairs.
Safety
17
417101558 Rev. 06-06.2021
