Ecolab Elados EMP KKS E60, Operating Instructions Manual

Page: 216 / 406

10.3.11 Configuration / Oval gear meter (only E60
PLUS & OGM PLUS )
The oval gear meter function makes it possible to record a “real” value in the operating
data/litre menu item
(
Ä
Chapter 10.5.3 ‘Operating data / Litre’ on page 106 ). Furthermore, this menu item
must be enabled to use the metering controller function (
Ä
Chapter
10.3.12 ‘Configuration / Metering controller (only E60 PLUS & OGM PLUS )’ on page 81 ) and
(
Ä
Chapter 10.3.2 ‘“Scrolling the display“’ on page 72 ).
The oval gear meter function is activated if the pump is extended to include a dongle box
(item no. 248606, EBS no. 10016094) to the E60
PLUS
, and an OGM
PLUS
(oval gear meter,
see accessories) has been connected.
If the dongle box and activation takes place by switching the pump off and then on again,
"E60
+
" appears on the bottom left of the pump's display unit.
If an OGM PLUS is connected to slot V on the dongle box and this has been activated in the
software by switching the pump on and off, "E60 ++ " appears in the pump display, the oval
gear meter function is automatically enabled in the Pump menu under Configuration, and
the metering controller function can be selected now.
If the pump software recognises that there is a dongle box or an OGM PLUS connected, and
the communication is then interrupted between the pump and the peripheral unit (through
the removal of the unit, for example), an error message is displayed
(
Ä
Chapter 12.2 ‘Alarm messages (display)’ on page 113 ).
To prevent this error message appearing repeatedly, the communication (connection)
must be restored, or the analysis must be disabled in the pump software
(
Ä Chapter 12.2.1 ‘Disabling dongle box, OGM PLUS , MicroFlow PLUS in the pump software ’
on page 114 ).
10.3.11.1 Selecting
Fig. 56: Configuration / oval gear meter: Selecting
- oval gear meter is inactive.
(Default setting)
3
oval gear meter is active.
Menu description
80 417101442 Rev. 12-02.2019