7.5.1
Select the setting code
Configuration settings for the pump:
1.
Keep the
[MENU/EXIT]
key combination pressed while the pump is currently in
operation.
ð
The main menu for the pump is displayed and the
Operating mode
menu item
appears inverted.
2.
Click the
[down]
button to go to the
Configuration
menu item.
ð
The
Configuration
menu item appears inverted.
3.
By pressing the
[START/STOP]
button , the
Configuration
selection is
confirmed
ð
The screens switches to the
Configuration menu
.
4.
In the
Configuration
menu, click the
[down]
button to go to the
Code
menu
item.
ð
The Code
menu item
appears inverted.
5.
By pressing the
[START/STOP]
button , the
Code
selection is confirmed.
ð
The inversion moves to the right. and the symbol
-
appears inverted.
6.
By clicking the
[down]
button or
[up]
button, the setting can now be configured for
"Code query is active"
ü
or "Code query is inactive".
-
ð
If the code query has been set to "active", the following symbol appears on the
left:
ü
.
7.
By pressing the
[START/STOP]
button , the
ü
selection is confirmed.
ð
The setting is applied, and the display returns to the
Configuration view
8.
The
Configuration
level can now be exited again by pressing the
[MENU/EXIT]
key combination.
ð
The
main menu
for the pump is displayed and the
Operating mode
menu item
appears inverted.
9.
Press the
[MENU/EXIT]
key combination again to exit the
main menu.
ð
The display indicates the
operating level
(ongoing operation) of the pump
again.
You can find an illustrated description of this function in the User Manual for
the EMP II E60 diaphragm metering pump, Article No. 417101795
Chapter 3 ‘Scope of supply’ on page 20).
Commissioning
39
417101964 Rev. 4-04.2019
Summary of Contents for 141277
Page 2: ......
Page 137: ...67 417101964 Rev 4 04 2019...
