Adjustment 03
OR
STEP9.
Press “down” or “up” to micro-
adjust inch movement to required
down limit position
OR
FLASH
ｘ２
OK
TO
STEP6
TO
STEP11
FLASH
ｘ２
12
STEP1.
Door should be in closed position.
On first startup memory is blank
(limits are not pre set)
STEP2.
Plug in. Light is on. Light flashes
5 times, no pre set limits. If light
flashes 3 times, limits have
already been set.
STEP3.
Press limit button once. Up LED
is on.
STEP4. Setting “Up” Limit
Press “Up” button & hold
continuously. Door is traveling up
at half speed. When door is
approaching Up limit position,
release “Up” button. Door stops.
STEP5.
Press “Up” or “Down” to micro-
adjust inch movement to
required up limit position
STEP7.
At required limit position. Press
limit button. OK light flashes &
LED goes out. “Up” limit setting
complete.
STEP8. Setting “Down” limit
Press limit button twice. “down”
LED is on. Press “down” button
& hold continuously. Door is
traveling down at half speed.
When door is approaching
down limit position, release
“down” button, door stops.
STEP10
.
At required limit position. Press
Limit button. OK LED flashes.
Up & Down LED are on. Up &
Down limits are now set.
