ECOFOREST ecoSMART e-manager, Installer Manual

Page: 36 / 122

Installer manual ecoSMART e-manager
36
EN 2.8. Heat pump software updating
If you have purchased your ecoSMART e-manager after your ecoGEO heat pump, you may need to upgrade the ecoGEO software.
In the version screen of the INFORMATION menu (Press to quick access from the main screen) you can check the software
version of both e-manager and ecoGEO heat pump. The version number Vxx_Bxx must match in both cases, as is indicated in the
following figure.
Figure 2.9. Information screen with software versión of e-manager (left) and heat pump ecoGEO (right).
Otherwise, contact the ECOFOREST technical service, which will provide you with the appropriate software version and indicate the
steps required to update it.
o
o BC15_EM_03_B04
Dat 02/10/15
0.0%
Bo 6.24 25/02/14
Boot 4.05 04/02/13
o
o BC15_HP_03_B04
Dat 02/10/15
Bo 6.24 25/02/14
Boot 4.05 04/02/13
EO fmw 5.0
EO Sv.v. 0.2