VERSION: v3.0
REVISION DATE: 12/2/22
INSTALLATION GUIDE
OVERVIEW
PAGE
04
OVERVIEW
The ClickFit mounting system consists of patented adjustable tile hooks and L feet, rails, and
the installation materials required for the mounting of photovoltaic modules on composition
shingle or tile roofs. For simplicity, tile hooks and L feet will be referred to as “attachments”.
ATTACHING TO THE ROOF
The attachments are fastened to the rafters. Attachments are height-adjustable to level the
system on uneven roof surfaces.
ATTACHING THE RAIL
The rail assembles to the attachments with a click-connector, or Clicker. The rail simply clicks
into place without the use of any tools.
ATTACHING THE MODULES
The modules are attached to the rails by means of mid clamps and end clamps.
Installer must review module and any 3rd party manufacturer’s documentation for
compatibility and compliance with warranty terms and conditions.
WARNING: This product must be installed and used according to this written instruction.
Any installation or use of this product not in accord with or not authorized by this written
instruction shall void any and all warranties, express or implied, on the product or the use
of the product and may cause failure, property damage and personal injury. EcoFasten is
not liable for any unauthorized use. Install and use only with other EcoFasten products to
ensure proper fit and function.
