VERSION: v3.0
REVISION DATE: 12/2/22
INSTALLATION GUIDE
AC
CE
SS
OR
IE
S
PAGE
22
INSTALLING THE FRAME MLPE MOUNT ACCESSORY:
• Slide the Frame MLPE Mount into the slot of the micro-inverter/power optimizer.
• Slide the micro-inverter/optimizer flange underneath the inside of the module frame with the
frame MLPE mount on the outside of the frame.
• Tighten the bolt to 144 in-lb to clamp the Frame MLPE Mount to the module frame and the
micro-inverter/power optimizer to the Frame MLPE Mount.
• Ensure that the lip on the clip is tight against the frame and that the micro-inverter/power
optimizer flange is tight against the clip flange to avoid rotation during tightening.
FRAME MLPE MOUNT AND MLPE MOUNT ARE COMPATIBLE WITH:
• ENPHASE: M250-72, 250-60, M215-60, C250-72, S230, S280, IQ 6, IQ 6+, IQ7, IQ 7A, IQ 7+, IQ7
PD, IQ 7X, Q Aggregator; IQ8-60, IQ8PLUS-72, IQ8A-72, IQ8H-208-72, IQ8H-240-72, IQ8M-72,
may be followed by -2-US
• NEP: BDM-300, BDM-300X2 and BDM-800
• SOLAREDGE: M1600, P300, P320, P340, P370, P400, P401, P405, P485, P505, P600, P700, P730,
P750, P800p, P800s, P801, P850, P860, P950, P960, P1100, P1101, S440, S500, S1200, S1201
• SEE PAGE 27 FOR COMPATIBLE MODULE LIST
FRAME MLPE MOUNT
