ETS 73
0548-990-51---60g_2019.10.indd
0548-990/52g
Page 73 of 98
Mounting and operating instructions
BLOCK/UNBLOC
Lock/unlock the joystick
• BLOCK
Lock the joystick. For a temporary unlocking, press OK for more than 1 second.
60 seconds after the last joystick actuation, the joystick is automatically relocked.
• UNBLOC
Permanent unlocking of the joystick.
TEACH
Completely close the door leaf. Initiate a setting-up procedure (during the setting-up procedure
the drive mechanism continues to beep).
• Teach OK? is validated by means of OK and aborted by any other joystick movement.
• The setting-up procedure can be canceled by means of the D-BEDIX (C-key).
Setting of the opening angle (Ao): During the first setting-up run, the drive mechanism moves
to the open position (Ao) or up to the recommended open position stop piece, whichever event
happens first, and the obtained result is memorized as opening angle. In the event of an excessi
-
vely big difference between the actual opening angle and the displayed angle (in the diagnostic
menu), this angle can be corrected (by means of dAxis). If the difference persists, the installation
precision should be checked.
