Installation
PIPES CONNECTIONS - ppr welding
Magen eco-Spark
®
Installation manual. © 2012, all rights reserved
P a g e
|
31
PIPES CONNECTIONS - PPR WELDING
1
Before welding the pipes, be sure to
clean the contact areas thoroughly.
Attach both the PPR pipe and the high
temperature pipe adaptor to the
machine.
2
Hold firmly until both ends are
sufficiently warm.
3
Once both ends are hot and melted,
quickly disconnect them from the
machine.
4
Swiftly join both ends and hold for a
number of minutes until the weld is
strong and firm.
5
Connect the newly welded pipe to the
panel using a PPC Set (as instructed in
page 21).