− 5 −
GERMAN
FRENCH
IT
ALIAN
SP
ANISH
ENGLISH
Align the projections on the
speaker with the slots in the bracket
(included with the CB1).
Screws (included with the CB1) X4
7
Route the speaker cable.
8
Insert the tabs on the speaker base into the grooves in
the bracket.
9
Turn the speaker base to hook the tabs on the speaker
base into the bracket.
10
Securely install the speaker base to the bracket.
Mark
Speaker base
Speaker base
Speaker base
Speaker base
Screwdriver
Screwdriver
Speaker base
Bracket
(included with the CB1)
Bracket
(included with the CB1)
Bracket (included with the CB1)
Bracket
(included with the CB1)
･
Loosen the screws of the speaker base, and then turn
the speaker base to the left or right in steps of 10° to
adjust.
･
When adjusting the direction of the speaker base,
never remove the screws, otherwise the speaker
base may fall down.
Caution
･
Align the tabs on the speaker base and the grooves
in the bracket, and then securely fit the speaker base
onto the bracket. If the speaker base and the bracket
are not securely locked together, there is the danger
that the speaker base may fall down.
･
Be careful not to clamp the speaker cable with the
speaker base, the bracket or the ceiling.
Caution
Screws (included with the CB1) X4
For speaker cable diameter
φ
7 mm or less (sold separately)
Cable holes
■
For speaker cable diameter
φ
7 mm or less
If the speaker cable is passed through the cable
holes in the speaker base, it will improve the outer
appearance of the speaker.
Tip
When securing the speaker to the bracket, turn the
speaker base in the direction of the arrow marked on
the speaker base to secure it. The illustration shows the
TD508MK3.
Tip