Eclipse TD508MK3 Owner'S Manual Download Page 11

− 37 −

GERMAN

FRENCH

IT

ALIAN

SP

ANISH

ENGLISH

On a ceiling or wall

On a ceiling or wall 

 ( The bracket (CB1) which is sold separately is required.)

Bracket 

(included with the CB1)

Spacer 

(included with the CB1)

For speaker cable diameter 

φ

7 mm or more

For speaker cable diameter 

φ

7 mm or less

Caution

Space

This product can be installed on ceilings and walls. If installing on a ceiling or a wall, you will need to use extra screws 
(sold separately). When installing the speaker, be sure to fit the safety cable (included with the CB1).

Safety cable

 (included with the CB1) 

Base cover

Speaker

Speaker base

Space

Leave enough space so that the rear of speaker does not touch the ceiling or wall.

      Caution

 

 Please read this owner's manual thoroughly prior to carrying out installation and connections.

 

  Depending  on  the  specific  installation  specialised  skills  maybe  required.  In  such  a  case,  please  consult  a 

qualified technician.

 

 Installation by two people is always advised.

 

  Please note the screws for fixing the product and safety cable to the ceiling are NOT supplied.

      Caution

Wall

Ceiling

Screw 

(sold separately)

Summary of Contents for TD508MK3



























Reviews: