Eclipse CD5100, Owner'S Manual, Page: 57 / 259

Making changes with Function Mode
57
XII
The character will be inserted where
the cursor is flashing.
Right: Advances the cursor to the
right.
Left: Returns the cursor to the left.
Upper: Advances the character
forward in its type.
Lower: Moves the character backward
in its type.
[Symbol] Initial value [!]
!
↔
"
↔
#
↔
$
↔
%
↔
&
↔
’
↔
(
↔
)
↔ ∗ ↔
+
↔
,
↔
-
↔
.
↔
/
↔
:
↔
;
↔
<
↔
=
↔
>
↔
?
↔
@
↔
`
↔
_
↔
!
↔
[Upper-case alphabet characters] Initial
value [A]
A
↔
B
↔
C
↔ ↔
X
↔
Y
↔
Z
↔
A
↔
[Numeric characters] Initial value [1]
1
↔
2
↔
3
↔ ↔
8
↔
9
↔
0
↔
1
↔
ATTENTION
• To change the type of character to be
entered, repeat steps 3 and 5.
• A maximum of 16 characters may be
entered per title.
• 30 titles can be stored.
• When the data storage area is full of data,
"FULL DATA" appears. To enter data newly,
delete the old data to make room.
Deleting station name/disc title
(Station Name/Title)
The station name/disc title that is
displayed at this point will be deleted.
Setting guide tone (Guide Tone)
The main unit is set at the factory to emit a beep
tone in response to button operation. The guide
tone feature may be disabled in the following
procedure:
The guide tone setting mode is
activated.
Setting clock display (Clock ON/
OFF)
Switches the clock display to ON/OFF.
The clock display setting mode is
activated.
4
Press the [SELECT] (Right/Left)
button to select the position in
which to enter the character.
5
Press the [SELECT] (Upper/Lower)
button to select characters.
6
Press the [ENTER] button to store
the title.
7
Press the [CUSTOM/MENU] or
[RTN] button to exit function
1
Press the [RTN] button for more
than two seconds, when title
setting mode is activated.
2
Press the [CUSTOM/MENU] or
[RTN] button to exit function mode.
1
Press the [SELECT] (Upper/Lower)
button to select the Guide Tone.
2
Press the [ENTER] button.
3
Press the [SELECT] (Upper/Lower)
button to select the guide tone ON/
OFF.
4
Press the [CUSTOM/MENU] or
[RTN] button to exit function mode.
1
Press the [SELECT] (Upper/Lower)
button to select the Clock ON/OFF.
2
Press the [ENTER] button.
3
Press the [SELECT] (Upper/Lower)
button to select the clock display
ON/OFF.