Eclipse CD5100, Owner'S Manual

Page: 26 / 259

26
Operation
Listening to CD
The front panel opens.
If a disc has already been loaded, the
disc is ejected by pressing the [
(OPEN/EJECT)
] button.
The front panel automatically closes
and the CD will immediately start
playing.
ATTENTION
• Playback may be intermittent when there is
a scratch on a CD or when the recorded
side is dirty.
• When a CD is already loaded, press the
[SOURCE] button for less than one second
to switch to the CD mode. (For details, refer
to "Switching Audio Modes" on page 17.)
1
Press the [ (OPEN/EJECT)]
button.
2
Insert a CD into the disc slot, label
side up.
CAUTION
Do not press the
[
(OPEN/EJECT)
]
button while CD is being inserted. This
could cause an injury and damage to the
front panel.
● Note ●
• When music data recorded in
the normal way (CD-DA) is
present on the same disc with
MP3/WMA music files, the
normally recorded music data
will be played. To listen to the
MP3/WMA music files, press
[MODE] button for more than
one second.
• When a non-MP3/WMA file is
played, "NO SUPPORT" will
appear.
• The optional CD changer
cannot be used to play MP3/
WMA files.