Eclipse AVX5000 Owner'S Manual Download Page 120

Page: 120 / 262

119

III

VII

VIII

XII

XIII

XIV

XVI

XVII

XVIII

XIX

When subtitles in several languages are recorded on a disc, the subtitles can be switched.

Press

on the remote control.

●

The subtitle number will be displayed.

If several audio languages are recorded on a disc, the languages can be switched.

Press

on the remote control.

●

The audio number and language will be displayed.

Switching subtitle language

SUB TITLE

Switching dubbed audio language

AUDIO

●

Each time

is pressed, the subtitle language will change in order

from among the subtitles recorded on the disc.

●

Depending on the disc, it may only be possible to change subtitles in the top
menu.

●

Each time

is pressed, the audio language will change in order from

among the languages recorded on the disc.

●

Depending on the disc, it may only be possible to change audio languages in the
top menu.

●

The dts format is not supported by this deck, so no audio will be emitted if “dts
audio” is selected on a disc that enable it. In this case, select “Dolby Digital
audio”, which should also be recorded on the DVD video.

●

dts is a registered trademark of the US company Digital Theater Systems, Inc.

SUB TITLE

AUDIO

Language 1

Language 2

Language…

Summary of Contents for AVX5000







































































































































































































































































Search results

Summary of Contents for AVX5000

Reviews:

Brands by name

Popular brands

Eclipse AVX5000, Owner'S Manual

Search results

Summary of Contents for AVX5000

Reviews:

Brands by name

Popular brands