Eclipse avn5435, Owner'S Manual

Page: 29 / 122

28
Adjusting sound quality
Basic operation
Setting POS (position selector)
The stereophonic position for obtaining optimum acoustic effects can be adjusted to match
the number and position of passengers.
In addition, front-to-back, right-to-left volume balance can be adjusted for the selected
position.

Touching the image of a seat
shown on the setting screen
will change the position.
• The selected position will change its
color to orange. Touching the seat
again will cancel the selection. The
four positions shown by the table
below can be set.
• Touching will cancel all settings.
• After making settings, touch . The position will be saved and the system will
return to the previous operation screen.
Touch switch Function Touch switch Function
Acoustics optimized for
driver's seat
Acoustics optimized for
both front seats
Acoustics optimized for
passenger's seat
Acoustics optimized for
rear seats
POS
OFF
BACK
• This setting cannot be done at the same time as adjustment of the volume
balance (see next page).
• This product is configured for vehicles with a left-side driver's position.