− 11 −
GERMAN
FRENCH
IT
ALIAN
SP
ANISH
ENGLISH
❶
Bracket
❷
Column
❸
Base plate
❹
Pan head screw X2
1
Assemble the base plate and the column using the pan
head screws.
2
Assemble the bracket and the column using the pan
head screws.
3
Insert the locking pin of the speaker into the hole in the
bracket, and then tighten it using the speaker angle
adjustment nut.
- Assembling the speaker stand -
Securely tighten the pan head screws.
Caution
･
Be sure to assemble the bracket as shown in the
illustration so that it faces as shown in the illustration at
right. If it is fitted any other way, the stand will fall over,
and damage to the speaker or personal injury may result.
･
Securely tighten the pan head screws.
Caution
･
Do not touch the cone material while carrying out
adjustments or the driver could be damaged.
･
Securely tighten the speaker angle adjustment nut.
･
Be careful not to damage the base of the speaker
when placing the speaker onto the stand.
Caution
❹
Pan head screw X2
Speaker
Foot
Speaker angle adjustment nut
Allen key (large) (included with speaker)
Locking pin
Pins X3
Grooves X3
Speaker cone
Align with the direction of
the speaker cone
Typical assembly
diagram
Fix the base plate to the column by fitting the two pan
head screws in the shaped holes, with the round feet
towards the floor.
Tip
･
Insert the locking pin into the hole in the bracket, and
align the three pins with the grooves in the speaker.
･
Before the speaker angle adjustment nut is
tightened, the angle of the speaker can be adjusted.
For details, refer to “Adjusting the speaker angle” on
the next page.
Tip
❷
Column
❶
Bracket