EC-PM-530B User's Manual
- 60 -
Chapter 7 Command Code Summary
7.1 General
The EC-PM-530B printer‘s control commands are compatible with ESC/POS.
Explanation of every command contains format and description. “Format” parts give three kinds of
command format, including ASCII Code, Decimal code and hexadecimal code. “Description” parts
describe the function of command. These three kinds of command format are equivalent, and you can
select one of them by your need.
The explanation format of each command is shown as following:
Command Function
Format: ASCII: Shown in standard ASCII character serial
Decimal: Shown in Decimal number serial
Hex: Shown in Hex number serial
Description: the function and using instruction of that command
7.2 Explanation of Command
HT Horizontal tab
Format: ASCII: HT
Decimal: 9
Hex:
09
[Description]
Move the print position to the next horizontal tab position.
If the current printing position exceeds the last horizontal tab position, the HT command will not be
executed.
Horizontal tab positions are set by “ESC D” command.
LF Print and line feed
Format: ASCII:
LF
Decimal:
10
Hex: 0A
[Description]
Print one line data in the line editing buffer and feed one line based on the current line spacing.
If the line editing buffer is empty, then only feed one line based on the current line spacing without printing.
CR
Print and carriage return
Format: ASCII:
CR
Decimal:
13
Hex:
0D
[Description]
The printer prints one line data in the line editing buffer and the print head returns to the left position
automatically.
FF
Print and change page
Format: ASCII: FF
Decimal: 12
Hex: 0C
[Description]
Print one line data in the line editing buffer and feed to the top of next page based on the current page
length.
EC Electronics, Ltd.
www.eclinepos.com
EC Electronics, Ltd
No. 221 Wai Yip Street, Kwun Tong
Kowloon, Hong Kong
TEL : (852) 3590 6397
FAX : (852) 3590 6497
E-MAIL : [email protected]
