102
Set
tings
8.14.2
EVENT GPI
The event input is one of the 0-10 VDC GPIs on the rear panel
.
When
Four GPIs available.
•
Input param
.:
selection of GPI
that
triggers the event.
•
Configuration: GPI configuration
. Can
be
analogue
(values 0-100),
or digital
(values 0 or 100). Depending on the
GPI’s operating mode, the Action section
will
display
different
options.
Configurable in the SETTINGS /
Knobs/GPIOs menu.
•
Polarity:
determines how the signal
received at the GPI is interpreted
:
Direct/Reverse: 0 VDC is maximum and
10 VDC is minimum or vice versa.
Status: indicates the current status of the
GPI
, where 0 is the minimum and 100 is the
maximum.
