9
6.2. Receiver
6.2.1. Front Panel
1.
S/PDIF
s
tatus indicator
2.
S/PDIF Audio Output connector
3.
Analog audio status indicator
4.
Analog audio line Output connector
5.
IR-RX connector for IR Sensor
6.
IR-TX connector for IR Blaster
7.
IR Sensor for Remote controller
8.
RS232 full-duplex port
9.
Program Mode: In this mode the RS232 port is used to control the unit, disabling
the IR-EXT port
10.
Normal Mode: In this mode the RS232 port will act as Pass-through extension
11.
ID Group LED display
12.
ID Group DEC button
13.
ID Group INC button
14.
Functional button (see chapter 5.2)
15.
Functional button (see chapter 5.2)
16.
HDMI, S/PDIF or Analog Audio selection button: the default audio selection is
HDMI.
