15
7.2.3. DHCP (Dynamic Host Configuration Protocol)
If you are using a Switch or a LAN where a DHCP server is enabled, changing the IP
manually it is not necessary because the DHCP server will automatically assing a unique
IP address to each device.
Note:
Once a factory reset is performed, the IP address settings will return to “Auto IP”.
The IP address will be restored to “169.254.x.y” range.
7.2.4. Network Requirements
Use of gigabit switches with jumbo frame and IGMP support is required and will create
the most appropriate scenario for both independent IP video networks, and cases where
IP video systems share data network. The typical data rate generated by the
Transmitters is about 300Mbps, for this reason the use of dedicated networks or VLAN
is very recommended. Ensure that the switch backpane data rate performances exceed
the ones required by your VEO system.
