Ecler VEO-MXH88D, User Manual, Page: 24 / 42

24
PRE
CAUTI
O
N
S
PACK
AGE
CO
N
TE
N
TS
DE
SC
RIP
TIO
N
&
FEATUR
ES
IN
ST
ALL
&
CO
N
N
EC
T
ST
ART
-UP
&
O
PE
RATI
O
N
PANE
LS
& R
EM
O
TE
FUN
CT
IO
N
S
TE
CH
N
IC
AL
DATA
WebGUI
FRI
M
WA
RE
UPGRA
DE
5.8 Remote Controlling
VEO-MXH88D can be remotely controlled over RS-232 or TCP/UDP communications
protocol.
• For RS-232 serial communication: enter the selected parameters on Series Port
Setting chapter.
• For TCP/UDP communication: enter the current VEO-MXH88D IP address and Port:
5000 for TCP or 5001 for UDP commands.
5.8.1 Series Port Setting
The serial parameters for a correct transmission are:
Baud rate 115200 (by Default) | Data bits 8 | Stop bits 1 | Parity None | Flow
control None
For a correct communication, both the host PC and VEO-MXH88D need to have the
same baud rate amongst the available options.
5.8.2 Command List
• All commands start with “#”
• “_” the underline cannot be omitted.
• Command head, Parameter and target need to add one “SPACE”.
Command Code Description Command Return
#video_d out[x] source=[y]
Switches Video Output channel [x] to Input
channel [y]
PARAMETERS DESCRIPTION
• [x]: Output channel number, ranging from 1 to 8. If
[x]=255, all output
• [y]: Input channel number, ranging from 1 to 8
<Output[x] : Video source> [Data=[y-1] : Input [y]]
#video_d out[x] onoff=[y]
Turns on and off Output channel [x]
PARAMETERS DESCRIPTION
• [x]: Output channel number, ranging from 1 to 8. If
[x]=255, all output
• [y]:
ON = 1
OFF = 0
<Output[x] : Video OnOff> [Data=[y-1] : Input [y]]
#audio_d out[x] iis=[y]
Enables or disables analogue audio extraction on
channel [x]
PARAMETERS DESCRIPTION
• [x]: Output channel number, ranging from 1 to 8. If
[x]=255, all output
• [y]: enable or disable analogue audio extraction
ON = 1
OFF = 0
<Output[x] : Audio IIS> [Data=[y-1] : Input [y]]