8
6.
LOCATION AND ASSEMBLY
To install this product correctly, you must be prepared to cut circular holes where
you would like to place the speakers and have the wiring necessary for each unit.
In order to install the speakers correctly:
1.
Remove the protective grating from the speaker using the hook provided in
the packaging.
2.
Cut a circular hole in the false ceiling: A template for cutting/painting is
included with each unit to simplify this process. Once the unit is separated
into two parts, the outside part can be used as a template to make the hole
in the ceiling, and the inner disk can be used to protect the speaker cone if
you would like to paint the plastic another colour.
3.
Use the clamps to connect the unit to the wiring of the system where the
speaker is being installed.
4.
Place the speaker in the newly cut hole. Hold it in place with your hand and
push it into place, all the while making sure that the three revolving
fasteners are drawn back.
5.
Press each of the three screws that are accessible from the front side of the
speaker. The speaker is now fixed in its final position.
6.
Reattach the protective grille.
