Firmware V1.4
20.05.2021
59/113
6.3.4 Configuration of the Analogue Inputs and Outputs at the Factory
The analogue inputs and outputs are configured at the factory as follows:
Analogue inputs 1..4 4..20 mA
Analogue inputs 5..7 0..10 V
Analogue outputs 1..4 0..10 V
DANGER
Important safety instructions!
Any maintenance by the user is
not
intended, as possible hazards
from incorrect re-assembly cannot be ruled out. Opening the device is
not
authorised! Reconfiguration
of the analogue inputs and outputs is
not
necessary. Incorrect handling can result in damage and
impairment of the controller functions! If the unit is
opened anyway, the unit must be subjected to
an insulation test
!