ECKELMANN VS 3015 CT, Operating Instruction, Page: 208 / 219

Firmware V1.41 V1 08.11.2022 208/219
•
•
•
for NT and Parallel Compressors with first SIOX extension module 1 – max. 8
for LT Compressors: 1 - max. 3
Menu 6-2-2 Compressor starts / Menu 6-2-5 PC starts / Menu 6-2-8 LT compressor starts
HISTORY POS:
XXXXX Description
Date: dd/mm/yy Date
Compressor starts
→
↓
The compressor starts of the date of row 1 are displayed by tapping the arrow - selection
max. 31 days in the past using
↑ , ↓
→
continue to Screen 6-2-2-
a /
Screen 6-2-5-a/
Screen 6-2-8-a
Screen 6-2-2-a Compressor starts / Screen 6-2-5-a PC starts / Screen 6-2-8-a LT compressor starts
Starts POS: XXXXX Description Default Dim.
Comp. stage 1 X daily compressor (stage) starts. Only the actual number
of compressor stages is displayed. 0 -
...
Comp. stage N* X 0 -
*number of displayed compressor stages depends on compressor type and expansion stage as follows:
for NT and Parallel Compressors with Basic module: 1 – max. 4
for NT and Parallel Compressors with first SIOX extension module 1 – max. 8
for LT Compressors: 1 - max. 3
Menu 6-2-3 Activity / 6-2-6 PC Activity / 6-2-9 LT Activity
HISTORY POS: XXXXX Description
Date: dd/mm/yy Date
Activity XXX %
↓
The activity in % (pack utilisation)
The activity of the date of row 1 are displayed by tapping the arrow - selection max.
31 days in the past using
↑ , ↓
10.1.8 Menu 7 Default Settings
VS3015CT POS: XXXXX Description
Load basic settings?
Are you sure?
NO: ESC
YES:
Confirmation prompt for loading the basic parameters
10.1.9 Menu 8 Service Mode
SERVICE ID: XXXXX Description
1 Analogue values Continue to menu 8-1
2 Compressors Continue to menu 8-2
3 LT compressors Continue to menu 8-3
4 Condenser fans Continue to menu 8-4
5 - -
6 Modbus Relay Continue to menu 8-6
7 Ejectors Continue to menu 8-7