LAN Gateway Firmware V1.2
V1.8 25. April 2012
© 2012 – ECKELMANN AG | BERLINER STRASSE 161 | 65205 WIESBADEN | PHONE +49(0)611 7103-0 | FAX +49(0)611 7103-133 | eckelmann.de
32/34
Technical modifications and errors reserved!
9 Appendix
9.1 Commissioning checklist
Module
Test
Note
Status
System
CAN bus
CAN bus termination
(terminating resistor)
checked?
For more information about the CAN
bus see the operating instructions
“Basics and general safety and
connection instructions”
LAN gateway
IP address
IP address configured?
IP subnet mask
IP subnet mask configured?
IP gateway
IP default gateway
configured?
TCP/IP port
TCP/IP port configured?
LDSWin default “5000“
CAN bus address
CAN bus address configured
to 127 or 126?
Factory side “127“
Reboot interval
Reboot interval configured?
Trace level
Trace level configured?
CAN test
CAN bus test conducted?
Status LEDs
Status LEDs checked?
Store Computer (Menu 7-3)
Name
Node name configured
on store computer?
e.g. LAN GATEWAY
Priority
Node priority configured
on store computer?
Factory side “0“
