Firmware V6.6.9
29.07.2020
118/147
•
•
•
•
•
•
•
•
Firmware Update
Input Defa
ult
3.Now perform
update and restart
If the above check box has been checked and the "Now perform update and restart" button has been
tapped, the update is "prepared" in the background. This process can take a few seconds (approx. 5
seconds).Then the system centre performs a restart and the new firmware is loaded.
-
-
Menu 4-1-10 - System Information
The screen for system information is called up using this button.
Menu 4-1-11 - Reset System
The screen for restarting the device, deletion of operating and energy data and the alarm and
message lists and the reset to factory settings is called using this button.
The screen contains the following parameters:
Reset system
Input
Login
required as ...
Perform restart of the device
Perform restart of the device
Y/N
Service
Deletion of the operating data archives of
the controller
Deletion of all archived operating data of the
following node groups:
Case controllers on the CAN bus
Case controllers on the Modbus
Pack controllers
BCT (building control technology)
Y/N
Master
Deletion of the energy archives
Deletion of all archived energy data of the
following node groups:
SO meters
M-bus meters
Y/N
Deletion of the alarm and message lists
Deletion of all entries in the alarm and
message lists
Y/N
Deletion of the 24h list
Deletion of all entries in the 24h list
Y/N
Reset to delivery condition
Reset to delivery condition (factory settings):
All data will be completely removed
from the system!
The system centre will be restarted
twice - Duration: approx. 3 minutes
Y/N
Admin
Menu 4-1-12 - System Upgrade
Risk of loss of data and the configuration!
All saved data and configurations of the system centre
are irrevocably lost during deletion of the archives (operating and energy data), the alarm and
message list as well as during reset to factory settings!
By setting the check mark for the required action, the following actions can be selected and executed
using the "
Execute selected actions
" button.
