manualshive.com logo in svg

ECKELMANN Case Controller UA 4 E Series, Operating Instruction

Share
Download
ECKELMANN Case Controller UA 4 E Series Operating Instruction Download Page 144

Firmware V3.13

21.04.2021

144/466

•

•
•
•

6.6.1  Requirements for firmware update

The following components are required for a firmware update:

The controller for which the update is intended.

Special feature

: Two device generations are available. The DIP switch S3 provides a quick 

distinguishing feature:

2nd generation controller

(from Oct. Nov. 2018)
with 9-pole DIP switch

1st generation controller

(since 2011)
with 8-pole DIP switch

Note:

 The settings depend on the controller type!

Laptop or PC with Windows 7 / Windows 8 / Windows 10

USB A-B cable *
The following files are required for the firmware update *

- The installation program 

"Firmware_Uploader_Setup_vxx.exe"

 (download as ZIP file)

- The firmware files "

UA400_vx.xx.bin

", "

UA400_vx.xx.dfu" or "UA400_vx.xx.hex"

 (download as ZIP 

file) 

Note:

 After the download, all ZIP files must be extracted to any directory.

Step 1: Install software
Before the first connection

 of the controller to the PC, the installation program 

"

Firmware_Uploader_Setup_vxx.exe

" must first be executed 

once

. Please follow the instructions given 

by the installation wizard. The components to be installed can be selected in the following window.

Administrator rights and an existing internet connection required during the initial 

installation!

 With the operating systems Windows 2000, XP, Vista, Windows 7 and Windows 

10, the PC 

must

 have an 

existing internet connection

 and the user 

must

 have 

administrator rights

 during installation while the installation program 

"

Firmware_Uploader_Setup_vxx.exe

" is being executed. Administrator rights will also be 

required when the controller is initially connected to the PC and the driver is installed by the 
operating system. Following installation and the initial connection of the controller to the PC, 
administrator rights are no longer required. In the event of questions concerning "administrator 
rights under Windows", the responsible IT administrator should be consulted.

Summary of Contents for Case Controller UA 4 E Series



















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands