Equipment Installation
XDM-300 Installation and
Maintenance Manual
3-110 ECI
Telecom
Ltd.
Proprietary
417006-2311-0H3-A00
Before you start:
Identify the LC/SFP extractor according to LC/SFP extractor (on page
).
Fold the SFP extractor lever into tool's wide end. Use the tool's narrow end to
perform the following procedure.
To insert an LC connector:
1.
Insert the fiber near its boot, under the extractor's narrow end tab. Orient
connector's clip in front of the tool's teeth.
Figure
3-76: Inserting the fiber into extractor's narrow end
2.
Push the extractor forward until stopped by the connector's clip.
Figure
3-77: Moving extractor's end to the connector
3.
Insert the connector into the SFP until it locks.
Figure
3-78: Inserting the connector into the SFP
Summary of Contents for XDM-300
Page 1: ...XDM 300 Installation and Maintenance Manual Version 7 417006 2311 0H3 A00...
Page 2: ......
Page 8: ......
