Chapter 2
•
Configuration via Web UI
3500782-0001 Revision E
35
M2M page
Figure 20
:
M2M Setup
The M2M page includes the following configurable parameters:
Ping configuration:
•
Context Watchdog - On/Off. The watchdog can be used to periodically verify
the UT network connectivity and take recovery action if a problem is
detected.
•
Primary Ping Address
–
enter an address pingable by the UT over the
spacelink.
•
Secondary Ping Address
. If you don’t have a secondary address, you can
configure the primary address in this field to give the UT more attempts to
reach the server.
•
Tertiary Ping Address.
If you don’t have a tertiary addres
s, you can configure
the primary address in this field to give the UT more attempts to reach the
server.
•
Time between Pings. If the connected device sends or receives data on a
periodic basis, set this time to be longer than the periodicity of the data.
