47
7. Remote Control TV Codes
Search the table in this section for your TV manufacturer. Make a note of the
control code (or codes) used by the manufacturer. Use the procedure
described on page 18 to program your remote control:
If the manufacturer of your TV is not listed, or the specified code does not work
use the following procedure to scan through all programmed remote codes.
1.
Switch your TV on.
2.
Point the remote at the TV. Hold down both the CH+ and VOL-
simultaneously (see above) for at least 2 seconds. The blue LED gives
two slow flashes to indicate successful entry into setup mode.
3.
Press
. The blue LED is turned on.
4.
Press
repeatedly until the TV switches off.
5.
Press
. The blue LED gives two slow flashes to indicate that the
code has been stored successfully.
If your TV does not turn off then it is not supported in the remote’s database.
Summary of Contents for HDT-610R Wi-Fi
Page 1: ...User Guide Ultra Slim Box HDT 610R ...
Page 2: ......
